Blacktooth Stock Requires 60 Days Lead Time
Coming in at 19 ounces, the Blacktooth reigns supreme as the lightest production carbon fiber stock on the market.
Length of pull: 13.5″
How to Measure Your Barrel Contour
Blacktooth Remington 700/Compatible
$710.00 – $810.00
How to Measure Your Barrel Contour
Action length is the distance between the front and rear action screws. These screws are found on the bottom of the stock fore and aft of the trigger and magazine/loading port, which hold the barreled action to the stock.
When taking this measurement remember to measure from the middle of one hole to the middle of the other hole. Also, do not mistake the trigger guard screws for action screws. Since the difference between a short or long action can be as little as ½-inch either mistake can be critical.
Another means of identifying action type- is the cartridge type. In most cases cartridges measuring less than 2.8″ will utilize a short action. Long actions will not exceed 3.340″. Calibers larger than this will generally use a magnum action, or a special purpose action specifically designed for that cartridge.
Peak 44 stocks are based on a tapered Sporter Contour. Tapered contour barrels have a radius that starts 2.750” from the breach and creates a smooth transition to each taper diameter. Options include #1 #2 and #3 contours. The Sendero Contour is a custom sporter sized between #3 and #4 Sporter.
Description
Coming in at 19 ounces, the Blacktooth is one of the lightest production carbon fiber stock on the market.
01
The negative comb reduces felt recoil and allows the shooter to maintain proper form. This is vital for target acquisition and follow up shots.
Negative
Comb
04. 3DHEX Pad
03. Advanced Ergonomics
02. Carbon Bedding Block
01. negative Comb
02
Carbon Bedding Block
Bonded to the outer shell and working in tandem with a set of aluminum pillars, this slip of carbon takes the place of a much larger and heavier aluminum bedding block. The carbon bedding block allows recoil impulses to transfer directly from the recoil lug of the action to the outer shell of the stock, enabling the use of lighter weight fill material throughout the stock shell.
01. negative Comb
02. Carbon Bedding Block
03. Advanced Ergonomics
04. 3DHEX Pad
03
Advanced Ergonomics
The Blacktooth’s grip combines a relatively thin wrist with a healthy ambidextrous palm swell and a substantial thumb groove to promote proper form while shooting.
04. 3DHEX Pad
03. Advanced Ergonomics
02. Carbon Bedding Block
01. negative Comb
04
3DHEX Recoil Pad
The 3DHEX recoil pad kills recoil unlike any pad on the market today. The first recoil pad to employ additive manufacturing at the production level. The set of collapsible voids function to stretch the time component of recoil, making that sharp kick a soft shove.
01. negative Comb
02. Carbon Bedding Block
03. Advanced Ergonomics
04. 3DHEX Pad
BARREL CONTOURS
Follow the below information to measure your barrel, bottom metal and inlet.
Barrel Channel Measurements
Dimensions are +/-.010 inches. We recommend a minimum of .02 inches of clearance between the barrel and stock. Some hand filling may be required.
| Barrel Inlets | A | B | C | D | E |
|---|---|---|---|---|---|
| #1 or #2 | 1.270“ | 1.218“ | 1.013“ | 0.911“ | 0.886“ |
| Sendero | 1.270“ | 1.270“ | 1.203“ | 1.130“ | 1.115“ |
REMINGTON 700 ACTION
Short Action Calibers
COMMON CHAMBERINGS
243 WIN, 6MM CREEDMOOR, 6.5 CREEDMOOR, 7MM-08 REM, 308 WIN
ADDITIONAL CHAMBERINGS
17 HORNET, 17 WSM, 17 HMR, 204 RUGER, 22LR, 22 NOSLER, 220 SWIFT, 224 VALKYRIE, 22-250, 22 CREEDMOOR, 22 WMR, 223/5.56, 22 HORNET, 222 REM, 6MM BR, 6MM REM, 260 REM, 6.5 GRENDEL, 270 WSM, 6.8 WESTERN, 6.8 REM SPC, 7 SAUM, 7 WSM, 300 WSM, 30-30 WIN, 300 BLACKOUT, 7.62x39MM, 300 RUGER (RCM), 325 WSM, 338 FEDERAL, 350 LEGEND, 444 MARLIN, 450 BUSHMASTER, 45.-70 GOVT
Long Action Calibers
COMMON CHAMBERINGS
6.5 PRC, 270 WIN, 7MM REM MAG, 28 NOSLER, 280 ACKLEY IMP, 300 WIN MAG, 30-06 SPRG, 300 PRC
ADDITIONAL CHAMBERINGS
25-06 REM, 6.5-300 WBY MAG, 26 NOSLER, 6.5-284 NORMA MATCH, 6.5×55 SWEDISH MAUSER, 264 WIN MAG, 27 NOSLER, 280 REM, 7 STW, 7MM MAUSER, 300 RUM, 30 NOSLER, 338 WIN MAG, 338 LAPUA, 33 NOSLER, 338 RUM, 35 WHELEN, 9.3x62MM MAUSER, 375 H&H, 375 RUGER
*Don’t see your chambering? Contact customer service.
M5 BOTTOM METAL
Fits Remington 700 and Remington Compatible actions.
- Fits M5 inlets (Will not Fit a Standard Remington BDL Inlet)
- Uses AICS magazines.
Available In
Short Action: Medium (Zermatt/Lone Peak/Stiller/Defiance XM+), Defiance XM
Long Action: (3.715″), and CIP with AICS 6715 magazines, CIP+ Length 338 Lapua (3.850″ Accurate & MDT Magazines)
HINGED FLOORPLATE BOTTOM METAL
Fits Remington 700 and Remington Compatible actions.
- Works with factory BDL bottom metal
- Will not fit M5
Blacktooth Remington 700/Compatible Videos
Test
Additional information
| Weight | 3.14 lbs |
|---|---|
| Dimensions | 37 × 9 × 3 in |
| Action Length | Long Action, Short Action |
| Bottom Metal | M5 DBM, Remington BDL |
| Left or Right Hand | Right Hand, Left Hand |
| Barrel Contour | Rem Mag Sporter, Sendero |
| Stock Finish | Carbide Black, Dark Grey & Light Grey Sponge, Green & Brown Sponge, Green & Grey Sponge, Green & White Sponge, First Lite Fusion Dip, Kuiu Verde 2.0 Dip, Raw Carbon |
There are no reviews yet.