Blacktooth Stock Requires 60 Days Lead Time
Coming in at 19 ounces, the Blacktooth reigns supreme as the lightest production carbon fiber stock on the market.
Length of pull: 13.5″
How to Measure Your Barrel Contour
Blacktooth Mark V
$709.00 – $809.00
How to Measure Your Barrel Contour
Action length is the distance between the front and rear action screws. These screws are found on the bottom of the stock fore and aft of the trigger and magazine/loading port, which hold the barreled action to the stock.
When taking this measurement remember to measure from the middle of one hole to the middle of the other hole. Also, do not mistake the trigger guard screws for action screws. Since the difference between a short or long action can be as little as ½-inch either mistake can be critical.
Another means of identifying action type- is the cartridge type. In most cases cartridges measuring less than 2.8″ will utilize a short action. Long actions will not exceed 3.340″. Calibers larger than this will generally use a magnum action, or a special purpose action specifically designed for that cartridge.
Peak 44 stocks are based on a tapered Sporter Contour. Tapered contour barrels have a radius that starts 2.750” from the breach and creates a smooth transition to each taper diameter. Options include #1 #2 and #3 contours. The Sendero Contour is a custom sporter sized between #3 and #4 Sporter.
Description
Coming in at 19 ounces, the Blacktooth is one of the lightest production carbon fiber stock on the market.
01
The negative comb reduces felt recoil and allows the shooter to maintain proper form. This is vital for target acquisition and follow up shots.
Negative
Comb
04. 3DHEX Pad
03. Advanced Ergonomics
02. Carbon Bedding Block
01. negative Comb
02
Carbon Bedding Block
Bonded to the outer shell and working in tandem with a set of aluminum pillars, this slip of carbon takes the place of a much larger and heavier aluminum bedding block. The carbon bedding block allows recoil impulses to transfer directly from the recoil lug of the action to the outer shell of the stock, enabling the use of lighter weight fill material throughout the stock shell.
01. negative Comb
02. Carbon Bedding Block
03. Advanced Ergonomics
04. 3DHEX Pad
03
Advanced Ergonomics
The Blacktooth’s grip combines a relatively thin wrist with a healthy ambidextrous palm swell and a substantial thumb groove to promote proper form while shooting.
04. 3DHEX Pad
03. Advanced Ergonomics
02. Carbon Bedding Block
01. negative Comb
04
3DHEX Recoil Pad
The 3DHEX recoil pad kills recoil unlike any pad on the market today. The first recoil pad to employ additive manufacturing at the production level. The set of collapsible voids function to stretch the time component of recoil, making that sharp kick a soft shove.
01. negative Comb
02. Carbon Bedding Block
03. Advanced Ergonomics
04. 3DHEX Pad
BARREL CONTOURS
Follow the below information to measure your barrel, bottom metal and inlet.
STANDARD ACTION (6 LUG)
Calibers
WEATHERBY CHAMBERINGS
240 WBY MAG, 6.5 WBY RPM, 338 WBY RPM
ADDITIONAL CHAMBERINGS
243 WIN, 25-06 REM, 6.5 CREEDMOOR, 270 WIN, 280 ACKLEY IMPROVED, 7MM-08 REM, 308 WIN, 30-06 SPRG
*Don’t see your chambering? Contact customer service.
Barrel Channel Measurements
Dimensions are +/-.010 inches. We recommend a minimum of .02 inches of clearance between the barrel and stock. Some hand filling may be required.
| Barrel Inlets | A | B | C | D | E |
|---|---|---|---|---|---|
| #1 Standard | 1.176“ | 1.176“ | 0.844“ | 0.796“ | 0.777“ |
| #1/#2 Magnum | 1.277“ | 1.277“ | 1.085“ | 0.862“ | 0.844“ |
| #3/#4 Magnum | 1.330“ | 1.330“ | 1.214“ | 1.012“ | 1.012“ |
| #3/#4 Standard | 1.176“ | 1.176“ | 1.038“ | 1.012“ | 1.012“ |
MAGNUM ACTION (9 LUG)
Calibers
WEATHERBY CHAMBERINGS
257 WBY MAG, 270 WBY MAG, 7MM WBY MAG, 6.5-300 WBY MAG, 300 WBY MAG, 340 WBY MAG, 30-378 WBY MAG, 338-378 WBY MAG, 378 WBY MAG, 416 WBY MAG, 460 WBY MAG
ADDITIONAL CHAMBERINGS
7MM REM, 300 WIN MAG, 338 LAPUA MAG, 375 H&H
*Don’t see your chambering? Contact customer service.
Barrel Channel Measurements
Dimensions are +/-.010 inches. We recommend a minimum of .02 inches of clearance between the barrel and stock. Some hand filling may be required.
| Barrel Inlets | A | B | C | D | E |
|---|---|---|---|---|---|
| #1 Standard | 1.176“ | 1.176“ | 0.844“ | 0.796“ | 0.777“ |
| #1/#2 Magnum | 1.277“ | 1.277“ | 1.085“ | 0.862“ | 0.844“ |
| #3/#4 Magnum | 1.330“ | 1.330“ | 1.214“ | 1.012“ | 1.012“ |
| #3/#4 Standard | 1.176“ | 1.176“ | 1.038“ | 1.012“ | 1.012“ |
Blacktooth Mark V Videos
Test
Additional information
| Weight | 3.14 lbs |
|---|---|
| Dimensions | 37 × 9 × 3 in |
| Action Length | Standard (6 lug), Magnum (9 lug) |
| Left or Right Hand | Right Hand, Left Hand |
| Barrel Contour | #1, #1 or #2, #3 or #4 |
| Stock Finish | Carbide Black, Dark Grey & Light Grey Sponge, Green & Brown Sponge, Green & Grey Sponge, Green & White Sponge, First Lite Fusion Dip, Kuiu Verde 2.0 Dip, Raw Carbon |
There are no reviews yet.